-15%
FLIGHT STABILIZATIONFLIGHT STABILIZATION
osd1osd1
osd-2-114×84osd-2-114×84

Minim OSD v1.1

2,690.00 2,280.00

Specs:
Voltage: 5-12v
Dimensions: 50 x 18 x 10mm
Weight 4g 

2 in stock

  • Description
  • Reviews (0)
  • Product Description

Description

This is a mini Arduino based on-screen display board. It’s tailored for use with ArduPilot Mega and the MAVlink protocol, and designed to be as small as possible.

It’s main components are an ATmega328P 8 bit microcontroller with an Arduino bootloader, and a MAX7456 monochrome on-screen display. Programming is done through an FTDI-compatible 6-pin cable.

It features two independent power and ground sections to isolate the OSD’s analog stage: a +5V section for the ATmega and the OSD’s digital stage, powered through the FTDI cable or other +5V source; and a regulated +5V section for the OSD’s analog stage, powered through the video in/out header and capable of handling up to +12V input.


Features:

• ATmega328P with Arduino bootloader
• MAX7456 monochrome on-screen display
• FTDI cable compatible pinout
• Standard 6-pin ISP header
• Two independent power sections with an LED indicator on each
• Solder jumpers for combining the power sections
• +5V 500mA regulator for up to +12V supply input (5-12v range)
• Solder jumper for PAL video option
• Exposed test points for HSYNC and LOS

Specs:
Voltage: 5-12v
Dimensions: 50 x 18 x 10mm
Weight 4g 

 

Please see the file uploaded under the files tab for Developer credits, Links to source code and other information! 

*Note: This is not an original Arduino brand product.

PRODUCT ID: 387000015

Reviews

There are no reviews yet.


Be the first to review “Minim OSD v1.1”

This is a mini Arduino based on-screen display board. It’s tailored for use with ArduPilot Mega and the MAVlink protocol, and designed to be as small as possible.

It’s main components are an ATmega328P 8 bit microcontroller with an Arduino bootloader, and a MAX7456 monochrome on-screen display. Programming is done through an FTDI-compatible 6-pin cable.

It features two independent power and ground sections to isolate the OSD’s analog stage: a +5V section for the ATmega and the OSD’s digital stage, powered through the FTDI cable or other +5V source; and a regulated +5V section for the OSD’s analog stage, powered through the video in/out header and capable of handling up to +12V input.


Features:

• ATmega328P with Arduino bootloader
• MAX7456 monochrome on-screen display
• FTDI cable compatible pinout
• Standard 6-pin ISP header
• Two independent power sections with an LED indicator on each
• Solder jumpers for combining the power sections
• +5V 500mA regulator for up to +12V supply input (5-12v range)
• Solder jumper for PAL video option
• Exposed test points for HSYNC and LOS

Specs:
Voltage: 5-12v
Dimensions: 50 x 18 x 10mm
Weight 4g 

Please see the file uploaded under the files tab for Developer credits, Links to source code and other information! 

*Note: This is not an original Arduino brand product.

PRODUCT ID: 387000015